IN PARTNERSHIP WITH:
CUTTING EDGE DRILLING TECHNOLOGY
Rotary Blast Hole Drills
C650 D
Rotary Drilling Series
- Diameter :6-1/4” (159mm) to 9” (229mm) by Rotary
- Single pass Depth : 30 ft (9m) & 42.6 ft (13m)
- Multi pass Depth : 177 ft (54m) / 150 ft (45m) &118 ft (36m)
Application: Mining & Quarrying
The REL C650 D Rotary Blast Hole drills are designed to drill clean holes of 6 1/4" (159mm) to 9" (229mm) diameter to a maximum depth of 177 ft (54m) / 150 ft (45m) / 118 ft (36m) using 30 ft (9m) long rods. Our Blast Hole is available in customized variants designed to deliver the required diameter hole based on your mining needs.
C750 D/E
Rotary Drilling Series
- Diameter : 9” (229mm) to 11” (279mm)
- Single pass Depth : 37 ft (11.3m) & 59 ft (18m)
- Multi pass Depth : 197 ft (60m)
Application: Mining
The REL C750 D/E Rotary Blast Hole Drill Machines is designed to drill holes ranging from 9" (229mm) to 11"(279mm). Our Blast hole drill is available in both Electric and Diesel Variants with two mast Options. The standard mast with a maximum single pass depth of 37 ft(11.3m). The REL Extended Mast with Maximum single pass depth of 59 ft(18m).
C850 D/E
Rotary Drilling Series
- Diameter : 11" (279mm) to 13 3/4” (349mm)
- Single pass Depth : 50 ft (15.2 m) / 59 ft (18m)
- Multi pass Depth : 197 ft (60m)
Application: Mining
The REL C850 D/E Rotary Blast Hole Drill Machines is designed to drill holes ranging from 11" (229mm) to 13-3/4" (349mm). Our Blast hole drill is available in both Electric and Diesel Variants with two mast Options. The standard mast with a maximum single pass depth of 50ft (15.2m). The REL Extended Mast with Maximum single pass depth of 59 ft(18m).
Down the Hole Drills
C615 D
DTH Drilling Series
- Diameter : 4” (101.6mm) to 6” (152.4mm)
- Single pass depth : 13.12 ft (4m)
- Multi pass depth : 52.5 ft (16m)
Application: Mining, Quarrying & Construction
The C615 D Jack-less DTH Drilling Rig is designed to drill holes of 4 inch (101.6mm) to 6 inches (152.4mm) up to a maximum depth of 52.5 ft (16m). Built to drill in limestone quarries, aggregate mines and various construction applications.
The 500 CFM – 200 Psi (14.17 m3/min -13.8 bar) compressor develops the necessary bailing velocity for efficient clean down the hole drilling.
C625 D
DTH Drilling Series
- Diameter : 4 ½ (114 mm ) to 6 ¾ (171 mm )
- Single pass depth : 16.4 ft /19.6 ft (5m /6m)
- Multi pass depth : 98.4 ft /78.7 ft (30m / 24m )
Application: Mining, Quarrying & Construction
The C625 D Jack-less Down the Hole Drill is capable of drilling clean hole of the diameter of 4 ½ (114 mm) to 6 ¾ (171 mm ). The sturdy mast of the C625 D delivers a single pass depth of 16.4 ft / 19.6 ft (5m / 6m) and multipass depth of 98.4 ft / 78.7 ft (30m / 24m ). The 900 CFM – 350 psi Compressor develops the necessary flushing velocity, improving drilling rate. Purpose-built for hard strata conditions the C625 D, DTH drilling machine is the right choice for Metal, Limestone, Dolomite and Aggregate open cast quarries and mines.
C650 D
DTH Drilling Series
- Diameter : 6-1/2” (165.1mm) to 8” (203.2mm)
Application: Mining
The REL C650 D Down-the-Hole Blast Hole drill comes from the family of the C650 D Series. Designed to drill clean holes of 6-1/2 inch (165mm) to 8 inch (203mm) diameter to a maximum depth of 175 ft (53.3m) using 25 ft (7.6m) long rods and 120 ft (36.5m) using 30 ft (9m) long rods.
